For now, Only Use PLA with the Robo R2. If you want to use any other sort of filament please Email me: email@example.com and have me test it.
PLA: Extruder Temp: 210 Bed Temp: 60
Robo R2 Manual can be Found here: http://docs.robo3d.com/en/latest/R2/index.html
To connect to the printer connect to the printer via this
The IP: http://192.168.2.101/
Before Printing You need to slice your 3d model using Cura for ROBO R2:
Slice and save the file
Upload the .gcode file to the printer via http://192.168.2.101/
then press print.
You can also make a timelapse by checking the timelapse box. at the end of the print the printer will save a .mp4 file of your print which you can download from the printer.
If the bed is not leveled: you can use the bed leveling wizard to level the bed.
on the LCD screen of the printer. enter Utilities --> wizard ---> then choose bed calibratrion, z offset, fine tune z offset.
I would do this in this order:
Bed Calibration: -use bed screws to manually and roughly level the bed
Z-offset calibration -- uses the LCD screen to set the offset, should be between 7-10 mm
then fine tune --- fine tuning will draw a line with printer. from here just make the perfect line to calibrate the bed.
On the LCD Screen
Enter utilities --> Wizard ---> Filament Change
The printer will walk you through changing the filament.
Please donate : https://pandariot779.com/donations-and-contact-information/
or buy filament using these links: https://pandariot779.com/merchandise/3d-printing-supplies-2/